NonStop S-Series Planning and Configuration Guide (G06.29+)

Planning for LAN Communications
HP NonStop S-Series Planning and Configuration Guide—523303-021
11-4
Multiple IP Addresses Needed
Multiple IP Addresses Needed
Servers require Internet protocol (IP) addresses for some of the system components
that are connected to LANs:
For example, a two-processor system with two E4SAs, two SWAN concentrators, a
primary and a backup system console, and no other equipment connected through the
LANs requires 26 IP addresses.
Some modular I/O components also require IP addresses. For more information, see
the Modular I/O Installation and Configuration Guide.
System Component
Number of IP
Addresses Required
MSP0. Ethernet port on the PMF CRU in group 01, module 01,
slot 50. Used for a low-level link.
1
MSP1. Ethernet port on the PMF CRU in group 01, module 01,
slot 55. Used for a low-level link.
1
Ethernet port on the PMF CRU in group 01, module 01, slot 50.
Used for a service connection.
1
Ethernet port on the PMF CRU in group 01, module 01, slot 55.
Used for a service connection.
1
IOAM enclosure 2 (1 for each
ServerNet switch
board)
System console 1 for each console
Ethernet 4 ServerNet adapter (E4SA) 4 (1 for each port)
SWAN concentrator 6 (1 for each port)
SWAN 2concentrator 12 (1 for each port)