NonStop S-Series Planning and Configuration Guide (G06.29+)

Completing the Installation Plan
HP NonStop S-Series Planning and Configuration Guide—523303-021
13-5
System Equipment Inventory Form
System Equipment Inventory Form
The System Equipment Inventory Form lists system enclosures and equipment that is
not installed in a system enclosure that you expect to receive from HP. The installer
uses this list to verify that all equipment ordered is received. (Equipment installed in a
system enclosure, such as ServerNet adapters and disk drives, appears on the System
Enclosure Checklist.)
If you have the technical documentation for your order, you can make a copy of that
documentation and use it instead of the System Equipment Inventory Form. However,
you must alert the installer to any substitutions.
Complete the System Equipment Inventory Form as follows.
When the equipment is received, the installer makes an entry in the Quantity Received
column as each piece of equipment is unpacked.
Note. The System Equipment Inventory Form cannot be used for an order form.
Task Comments
Enter the name of the system in the
System Name field.
The system name must match the system name
on all other forms in this packet.
For each system enclosure ordered:
•
Enter the product number of each
type of system enclosure.
•
Enter the description of each type
of system enclosure.
•
Enter the number of each type of
system enclosure.
In this form, do not list the individual components
installed in the system enclosures at the factory.
For each piece of system equipment
ordered:
•
Enter the product number or part
number of the equipment in the
Part or Product Number column.
•
Enter a description of the
equipment in the Description
column.
•
Enter the number of items of this
equipment that you have ordered
in the Quantity Ordered column.
This list indicates all equipment that is NOT
installed in a system enclosure. Examples of
equipment you might list here are terminals,
printers, tape drives, and ServerNet wide area
network (SWAN) concentrators.
Enter the page number of this page
and the total number of pages of this
form in the Page ___ of ___ field.
When you have completed this form,
enter the date in the Date field.