NonStop S-Series Planning and Configuration Guide (G06.29+)

Completing the Installation Plan
HP NonStop S-Series Planning and Configuration Guide—523303-021
13-7
Enclosure Arrangement Diagram
Enclosure Arrangement Diagram
The Enclosure Arrangement Diagram tells the installer how the system enclosures are
to be arranged.
Complete the Enclosure Arrangement Diagram as follows.
Task Comments
Enter the name of the system in the
System Name field and date in the
date field.
This system name must match the system name
on all other forms in this packet.
Enter the Building name or number and
room number in the Building and Room
fields.
Enter the system number in the
System Number (In Expand Network)
field.
This number must be in the range 0 through 254.
Enter the number of rows in which your
system is arranged in the Number of
Rows field.
Draw each enclosure included in the
configuration on the diagram.
Distinguish between base enclosures and
stackable enclosures. You can indicate base
enclosures by drawing casters (wheels) on them.
When you have completed this form,
enter the date in the Date field.