NonStop S-Series Planning and Configuration Guide (G06.29+)

Completing the Installation Plan

HP NonStop S-Series Planning and Configuration Guide—523303-021

13-16

PMF CRU Configuration Forms

The PMF CRU Configuration Form and PMF 2 CRU Configuration Form tell the

installer about each PMF CRU in the system and the configurable items associated

with it. These completion instructions apply to both forms.

Task Comments (page 1 of 2)

Enter the name of the system in the

System Name field.

This system name must match the system name

on all other forms in this packet.

Enter the group number of the

enclosure that contains this PMF CRU

in the Group field.

Enter the slot number of this PMF CRU

in the Slot field.

If you are attaching a tape drive to the

SCSI port on this PMF CRU, complete

the SCSI Port block:

1. In the Product Number field, enter

the product number of the tape

drive.

2. In the SCF Name field, enter the

SCF object name of the tape drive.

3. In the SCSI Cable field, enter the

part number of the SCSI cable you

will use with this tape drive.

If you are not attaching a tape drive to the SCSI

port on this PMF CRU, leave the SCSI Port block

empty.