NonStop S-Series Planning and Configuration Guide (G06.29+)

Completing the Installation Plan
HP NonStop S-Series Planning and Configuration Guide—523303-021
13-17
PMF CRU Configuration Forms
If this PMF CRU is in group 01,
complete the Ethernet Port block.
If this PMF CRU is in group 01,
slot 50:
1. In the IP Address field, enter the
initial IP address assigned to this
port.
You might want to indicate the IP
address that will replace the initial
IP address.
2. In the Adapter Name field, enter
$ZZLAN.MIOE0.
3. In the SAC Name field, enter
$ZZLAN.MIOE0.0.
4. In the SAC Access List field, enter
0,1.
5. In the PIF Name field, enter
$ZZLAN.MIOE0.0.A.
6. In the LIF Name field, enter
$ZZLAN.LANX.
If this PMF CRU is not in group 01, leave this
Ethernet Port block empty.
If this PMF CRU is in group 01,
slot 55:
1. In the IP Address field, enter the
initial IP address assigned to this
port.
You might want to indicate the IP
address that will replace the initial
IP address.
2. In the Adapter Name field, enter
$ZZLAN.MIOE1.
3. In the SAC Name field, enter
$ZZLAN.MIOE1.0.
4. In the SAC Access List field, enter
1,0.
5. In the PIF Name field, enter
$ZZLAN.MIOE1.0.A.
6. In the LIF Name field, enter
$ZZLAN.LANY.
When you have completed this form,
enter the date in the Date field.
Task Comments (page 2 of 2)