NonStop S-Series Planning and Configuration Guide (G06.29+)
Specifications
HP NonStop S-Series Planning and Configuration Guide—523303-021
B-10
Enclosure Specifications
Enclosure Specifications
This subsection contains these specifications for system enclosures:
Weights for System Enclosures on page B-10
AC Power Requirements for One System Enclosure on page B-11
Environmental Specifications for One System Enclosure on page B-11
Note the following about these specifications:
•
All weights are approximate.
•
Sizes and weights include:
°
Cable management hardware
°
Appearance-side door
•
Sizes and weights do not include the optional service-side door.
•
A fully populated enclosure contains components in all slots.
•
Reduced weights are based on the removal of all the following components: disk
drives, PMF CRUs, IOMF CRUs, SEBs, ServerNet adapters, and power supplies.
Weights for System Enclosures
Enclosures Without a
Power Shelf
Enclosures With a
Power Shelf
Factor Notes lb kg lb kg
Weight:
frame
Base enclosure 118 54 118 54
Stackable enclosure 71 32 71 32
Frame base 47 22 47 22
Weight:
enclosure
Components
removed
107 49 142 66
Fully populated 223 101 304 138
Weight:
frame and
enclosure
Components
removed
178 81 213 97
Fully populated 294 134 375 170
Weight:
frame and
stacked
enclosures
Components
removed
332 151 402 183
Weight:
service-
side door
Optional 20.5 9.3 20.5 9.3