NonStop S-Series Planning and Configuration Guide (G06.29+)

Specifications
HP NonStop S-Series Planning and Configuration Guide—523303-021
B-15
IOAM Enclosure Configuration Rules
IOAM Enclosure Configuration Rules on page B-15
Environmental Specifications for an IOAM Enclosure on page B-15
Dimensions for an IOAM Enclosure on page B-16
Weights for an IOAM Enclosure and Selected Components on page B-16
IOAM Enclosure Configuration Rules
IOAM enclosures can be attached only to group 01. IOAM enclosures can have these
tetrahedral group numbers,
For any IOAM enclosure group number, the corresponding groups numbers in the
other three inner tetrahedron quadrants cannot be configured to another I/O enclosure.
This restriction does not apply to the groups in the outer tetrahedron.
For example, If you configure an IOAM enclosure in group 01, its group number will be
Group11, therefore:
•
You cannot have an I/O enclosure configured as group 21, 31, or 41
•
You can have I/O enclosure configured as groups 51, 61, 71, and 81
In general, If you add an IOAM enclosure in group 1x, you cannot have an I/O
enclosure configured as 2x, 3x, or 4x, but you can have I/O enclosures configured in
groups 5x, 6x, 7x, and 8x where x is the I/O enclosure identifier for each processor
number.
Environmental Specifications for an IOAM Enclosure
Configuration Groups
Tetra 8 11, 12
Tetra 16 11, 12, 13,14,15
Temperature Operating 41 to 95 °F (5 to 35 ° C)
Up to 72-hour storage -20 to 131 ° F (-29 to 55 ° C)
Relative Humidity Operating 10% to 85%, noncondensing
Nonoperating 10% to 95%, noncondensing
Altitude Operating 0 to 10,000 feet (0 to 3,048 meters)