NonStop S-Series Planning and Configuration Guide (G06.29+)

HP NonStop S-Series Planning and Configuration Guide—523303-021
D-1
D
Case Study: ServerNet Cable
Lengths
This case study documents the planning and installation of ServerNet cables in a
NonStop S70000 system for a fictitious company.
Hardware Configuration
This system has four processor enclosures and eight I/O enclosures. The planner for
Developers Inc. has decided to arrange the enclosures in two rows that both face in
the same direction. Processor enclosures are arranged in one row of single-high
stacks, and I/O enclosures are arranged in one row of double-high stacks behind them.
This figure shows the enclosure arrangement in this example system.
Note. Examples and sample cable routes are for illustration only and might not be suited for
your particular purpose. HP does not warrant, guarantee, or make any representations
regarding the use, or the results of the use, of any examples or cable routes in any
documentation. You must verify the applicability of any example or cable route before placing
the hardware into production use.
VST939.vsd
Height of
base enclosure
with casters:
34 inches (95.5 cm)
Depth of
cable
channel:
5 inches
(12.7 cm)
Width of
cable
channel:
2 inches
(5 cm)
Service clearance:
48 inches (122 cm)
Depth of enclosure
with cable channels:
30.75 inches (74 cm)
Height of
stackable enclosure
without casters:
32.25 inches (82 cm)
Width of enclosure
with 2 cable channels
23 inches (58 cm):