NonStop S-Series Planning and Configuration Guide (G06.29+)

Guide to Server Manuals
HP NonStop S-Series Planning and Configuration Guide—523303-021
E-3
Titles and Abstracts
NonStop S-Series Operations
Guide
Describes how to perform routine system hardware
operations for NonStop S-series servers. These tasks
include monitoring the system, performing recovery
operations, operating disk and tape subsystems,
performing routine hardware maintenance, and starting
and stopping the system. This guide is written for system
operators.
NonStop S-Series Planning and
Configuration Guide
Explains how to plan and configure NonStop S-series
servers, plan and prepare your site, operational
environment, and hardware and software configurations.
In addition, the guide describes the ServerNet system
area network (ServerNet SAN) and the available
hardware and system configurations. The guide provides
a glossary, parts list, and a guide to other NonStop
S-series manuals. This guide is written for those who
plan the installation, configuration, and maintenance of
the server and the software environment.
NonStop S-Series Service
Provider Supplement
Provides information for service providers about
removing and installing field-replaceable units (FRUs)
that are not customer-replaceable units (CRUs) and
installing enclosures in 19-inch racks. Installation and
service information about equipment identified as CRUs
is located in the NonStop S-series server manual set for
which this manual is a supplement. This supplement also
contains information for upgrading an enclosure from a
NonStop S7000 server for use in a NonStop S7400 or
Sxx000 server.
The NonStop S-Series Service Provider Supplement is
available only to service providers who have completed
special training provided by HP.
NonStop S-Series System
Expansion and Reduction Guide
Describes how to add enclosures to, and remove
enclosures from, a NonStop S-series system online.
NonStop Systems Introduction Gives new users an orientation to HP NonStop systems
by describing their use in Zero Latency Enterprise (ZLE)
architectures. The manual introduces ZLE concepts and
components, describes the application integration and
development environment and architecture on NonStop
systems, and describes basic concepts, terms, and
entities in the NonStop environment.
Operator Messages Manual Describes all messages that are distributed by the Event
Management Service (EMS). This manual provides an
explanation of the cause of each message, discussion of
its effects on the system, and suggestions for corrective
action.
Title Abstract (page 2 of 2)