NonStop S-Series System Console Back Panels

Himalaya S-Series System Console Back Panels–135716
1
Himalaya S-Series System Console
BackþPanels
This document reproduces information contained in the quick reference cards included
with system consoles provided by Tandem for Himalaya S-series servers. The following
quick reference cards are included in this document:
System Console Back Panel Quick Reference Cards
The system console back panel quick reference cards illustrate the system console
provided by Tandem for use with Himalaya S-series servers. A new quick reference card
is provided with each system console model. You use this card in conjunction with the
Himalaya S-Series Hardware Installation Guide to install the system console. These
cards show the type and location of connectors that are used to connect the system
console to LAN hardware and to a modem.
Back Panel for the Himalaya S-Series System Console, Model 1
Figure 1 shows the back panel of the Model 1 system console with all the connectors
labeled.
Title Part Number
Back Panel for the Himalaya S-Series System Console, Model 1 127875 A01-01
Back Panel for the Himalaya S-Series System Console, Model 2 134428 A00-00
Back Panel for the Himalaya S-Series System Console, Model 3 135717 A00-00
Figure 1. Back Panel of Himalaya S-Series System Console, Model 1
002CDT .CDD
Voltage
Selector
Switch
Power Cord
Outlet
Video
Port
Parallel
Port
Serial
Port
1
Keyboard
Port
Mouse
Port
Serial
Port
2
10Base-T
Connector
Network Interface
Card (NIC)
(Slot May Vary)
Link
Beat
LED