NonStop S-Series System Expansion and Reduction Guide

Reducing a System Online
HP NonStop S-Series System Expansion and Reduction Guide—522465-009
4-3
1.3 Save the Current Donor System Configuration
TSM Software
If you are reducing your system online, you must be running both the G06.04 or later
RVU and a compatible version of the TSM package. If you are running an earlier RVU
than G06.04, you must reduce the system offline, as described in Section 5, Reducing
a System Offline.
1.3 Save the Current Donor System Configuration
Before you alter the donor system’s configuration, save its current configuration for
fallback purposes:
1. Log on to TACL, start SCF, and enter the SAVE CONFIGURATION command:
>SCF
-> SAVE CONFIGURATION xx.yy
where xx.yy is a configuration number in the range 00.00 through 99.99 that is
not already in use.
If you specify a number that is already in use, you receive this message:
Configuration file $SYSTEM.ZSYSCONF.CONFxx.yy already exists.
Replace it (Y/[N])
2. Enter N and retry the SAVE CONFIGURATION xx.yy command using another
number.
3. Record the number of your saved configuration (xx.yy)on Worksheet 1.
Step Action Use This Procedure Record Information Here
1. Record the current OSM
or TSM version.
Determine the Product
Version of the TSM Client
Software on page A-7.
Worksheet: 1
Section: TSM client
software on donor system
console, Initial Version.
2. Verify that you are
running a version of the
TSM client software that
is compatible with the
TSM server software on
the system you plan to
connect to.
Start > Programs >
Compaq TSM > TSM
Documentation > TSM
Read Me > TSM Product
Version Information >
TSM Software Product
Versions
Worksheet: 1
Section: TSM client
software on donor system
console, Needs to Be
Upgraded to
3. If the two TSM versions
differ, upgrade the TSM
client software.
NonStop System Console
Installer Guide
4. Record the upgrade. Worksheet: 1
Section: TSM client
software on donor system
console
Upgraded checkbox