NonStop S-Series System Expansion and Reduction Guide

Contents
HP NonStop S-Series System Expansion and Reduction Guide—522465-009
vi
B. ServerNet Cabling
Stop the OSM or TSM Low-Level Link A-8
Start a Startup TACL Session A-9
Start the OSM or TSM Low-Level Link A-9
Start the OSM Service Connection or TSM Service Application A-9
B. ServerNet Cabling
C. Checklists and Worksheets
D. Stopping Devices and Processes
Prepare and Stop Internal Disk Drives D-2
Terminate or Move Processes to Other Internal Disk Drives D-2
Stop Internal Disk Drives D-3
Delete Internal Disk Drives D-5
Prepare and Stop Adapters D-5
Prepare and Stop an E4SA D-6
Stop the E4SA Adapter D-8
Delete the E4SA Adapter D-9
Safety and Compliance
Glossary
Index
Figures
Figure 2-1. Four Enclosures as Four Blocks 2-4
Figure 2-2. Four Enclosures as Three Blocks 2-5
Figure 2-3.
Four Enclosures as Two Blocks of Different Sizes 2-6
Figure 2-4.
Four Enclosures as Two Identical Blocks 2-7
Figure 6-1. Examples of Labeled ServerNet Cables 6-5
Figure 6-2. Group ID Switches 6-16
Figure 6-3. ServerNet Cable Connections for a Multiple-Enclosure Block 6-25
Figure 6-4. Disconnecting Ethernet Cable 6-28
Figure 6-5. PMF/IOMF CRU Power On Button 6-29
Figure 7-1. PMF/IOMF CRU Power-On Cables 7-3
Tables
Table 4-1. Router Port Connections to SEBs 4-12
Table 4-2. Router Port Connections to MSEBs 4-13
Table 4-3. Router Port Connections to SEBs 4-15