NonStop SOAP User's Manual

Installing NonStop SOAP

NonStop SOAP User’s Manual—520501-012

2-8

Installing GUI-Based NonStop SOAP Admin Tool

To install a GUI-based SOAP Admin tool:

1. Enter the directory location where NonStop SOAP version 3.0 has been installed.

The accepted default is /usr/tandem/nssoap/t0603h01 (for H-series systems only).

2. Enter the directory location where the NonStop XML parser version 5.0 has been

installed. The default directory is /usr/tandem/xml/T0563H01 (for H-series systems

only).

3. Enter a Guardian volume and subvolume location for the NonStop SOAP

Administration server’s metadata, ($

Volume Name

sub-volume name

4. Enter the directory location of the iTP WebServer directory. The accepted default is

/usr/tandem/webserver.

5. Enter the subdirectory name for the deployment file to be created. The directory

needs to be under the iTP WebServer directory. The default deployment directory

is entered as “soapadmin”.

6. The script prints lines that need to be added to the local.config file in the iTP

WebServer conf directory. The local.config file exists since it was created during

the installation of NonStop SOAP. After the lines are added, the script says to

restart the iTP WebServer.

Go to the deployment directory of Soapadmin server and follow the instructions

mentioned in the deploy_instructions file.

Installation Steps for the Windows Workstation

Prerequisites

The NonStop SOAP Admin GUI requires Windows XP or Windows 2000.

•

Since the NonStop SOAP Admin GUI is a Java application, Java needs to be

installed on the workstation. The JDK should be version 1.4.1 or later, and the

JAVA_HOME and PATH environment variables should be set properly.

•

Post-installation script Step 4 should be completed before beginning the

workstation installation (Installing the NonStop SOAP Admin Server for the GUI-

based NonStop SOAP Admin Tool).

•

Review the NonStop SOAP Utilities, T0623H01, SOFTDOC, which contains

installation instructions.

•

Copy the T0623TAR from $vol.ZSOAPV30 location on the NonStop system.

NonStop SOAP Admin GUI Installation

1. Copy the T0623TAR file from the NonStop system to a directory on the workstation

and rename it as T0623.tar