NonStop Software Essentials User's Guide

Shift-F2Submit changes___
F16Return to main TMI menu___
Update Target Volume Usage
2 and press F1Select Volume Maintenance___
$DSMSCMEnter one or more scratch volume names___
Shift-F2Submit changes___
F16Return to main TMI menu___
Set Operator Security
3 and press F1Select Select Security Maintenance___
1 and press F1Select Operator Security Maintenance___
authorized-DSM-user or
alias123
Enter an operator user ID or alias to add___
All set to yesSet the DSM/SCM tasks the operator can perform___
F7Add operator___
Shift-F16After all operators are added, return to main TMI menu___
Set Target Database Administrator Security
3 and press F1Select Security Maintenance.___
2 and press F1Select Database Administrator Security Maintenance___
authorized-DSM-user or
alias123
Enter a target database administrator user ID or alias to add___
All set to yesSet the DSM/SCM tasks the target database administrator can perform___
F7Add target database administrator___
F16After all administrators are added, return to main TMI menu___
Shift-F16Exit TMI___
Task 4: Modify Profile Information for the Logical Target
For more information, refer to “Target Profile” (page 149).
Task 5: Initialize the Logical Target on the Host System
Initialize the logical target on the host system after running INITENV with the Initialization option.
In NonStop Software Essentials, use the Initialize Target action, located under “Target Maintenance
Actions” (page 64).
Task 6: Receive Software
Receiving software comprises reading software and placing it in the archive. HP highly recommends
that you use the same RVU and related SPRs that were used to build the current operating system.
To receive the software into the archive, see “Receiving Software Into the Archive” (page 79).
74 Configuring the NonStop Software Management Environment