NonStop System Console Installer Guide

16 Installing OSM Low-Level Link (T0633ABT)
NOTE:
• For T0633AAT and later, the OSM Low-Level Link is made to work with MR-Win6530 instead
of OutsideView.
◦ You must install MR-Win6530 before installing the Low-Level Link (the Low-Level Link
installer looks for the presence of MR-Win6530 and returns an error if not found).
◦ You must install OSM Low-Level Link T0633AAT (or later) before starting MR-Win6530.
◦ You must launch MR-Win6530 from the Start menu at least one time before using the
OSM Low-Level Link.
• If you revert back to the previous T0633ABM version of OSM Low-Level Link, you must restart
the system console to complete this change.
Follow the instructions in this chapter to install OSM Low-Level Link on your system console.
1. If you selected OSM Low-Level Link on the NonStop System Management Tools Master Installer
list, the OSM Low-Level Link ReadMe File dialog box appears.
NOTE: If you want to install OSM Low-Level Link without running the NonStop System
Management Tools Master Installer, double-click Setup.exe in the OSM Low-Level Link folder
in the NSC DVD.
If the OSM Low-Level Link is running, quit the application before beginning the installation.
2. Click Next to continue.
You are asked whether the system console is connected to the dedicated LAN or non-dedicated
(public) LAN:
3. Select a LAN option:
• Click No if the system console is connected to a non-dedicated (public) LAN.
Setup informs you that the OSM Low-Level Link is not installed at this time.
NOTE: You cannot use the OSM Low-Level Link on a non-dedicated (public) LAN.
Go to Step 6.
• Click Yes if the system console is connected to the dedicated LAN.
NOTE: If you did not close the OSM Low-Level Link before beginning the installation,
a message appears asking if you want to close it now. To close the existing OSM Low-Level
Link and continue installing the latest version of OSM Low-Level Link, click Yes.
46 Installing OSM Low-Level Link (T0633ABT)