NSM/web Installation Guide

Installation (T2806ABA and Superseding SPRs)
HP NonStop NSM/web Installation Guide—529994-002
1-9
8. Enter the CPU Number for Servers
name must be of the form $ANNN where A is any letter and N is
any letter or digit.
ENTER the process name here or leave blank to use the current
value $ZNSM: $ZLOB
Checking for unused process name $ZLOB ...
Process $ZLOB is available.
8. Enter the CPU Number for Servers
Enter the CPU number to be used by the NSM/web servers, or leave it blank to use the
default. When started, the NSM/web installer identifies which processors are
configured (usually all of them) and which ones are running when the installer is run
(usually all the processors that have been installed):
Server CPU
==========
The cpu in which NSM/web servers are to run.
Your system has 16 CPUs configured although they may not all be
installed.
CPU 0 is running.
CPU 1 is running.
CPU 2 is running.
CPU 3 is running.
ENTER the cpu number here or leave blank to use the current
value 0: 2
9. Enter the Server Priority
Enter the server priority for the NSM/web servers, or leave it blank to use the default:
Server priority
===============
The cpu priority at which NSM/web servers are to run.
ENTER the priority here or leave blank to use the current value
160:
10. Enter the Home Terminal for Servers
Enter the server home terminal for the NSM/web servers, or leave it blank to use the
default:
Server home terminal
====================
The home terminal for NSM/web servers.
It will not be used but must exist and be available for output.
ENTER the home terminal here or leave blank to use the current
value $ZHOME:
Checking for existing $ZHOME ...
Process $ZHOME exists.