NSM/web Installation Guide

Installation (T2806ABA and Superseding SPRs)
HP NonStop NSM/web Installation Guide—529994-002
1-10
11. Enter the TCP/IP Configuration
11. Enter the TCP/IP Configuration
Select the IP addresses on which NSM/web is to be available. You must specify all the
IP addresses serviced by the Web server you instruct your users to use for NSM/web.
The installer finds all available IP addresses and enables you to enter additional IP
addresses that are not currently running. After all these addresses are gathered, you
can select which ones you want NSM/web to service.
The method for specifying the NonStop TCP/IP configuration supports situations in
which a single DNS name is being serviced by multiple IP addresses:
TCP/IP Configuration
====================
NSM/web needs to be configured for each of the IP addresses
handled by the webserver you have specified.
The installer will try to discover all of the IP addresses that
are available right now and will then give you an opportunity to
add additional IP addresses that it missed. You will then be
given an opportunity to select which IP addresses are to be used
by NSM/web.
Do you wish me to find running IP addresses (y/n) [default Y] ?
:y
Looking for running TCP/IP processes...
The following running TCP/IP processes were found:
$ZTCP0
$ZTC0
$ZTCP1
$ZSM1
Looking for IP addresses on $ZTCP0...
Looking for IP addresses on $ZTC0...
Looking for IP addresses on $ZTCP1...
Looking for IP addresses on $ZSM1...
The following IP addresses are currently known:
192.168.101.221 on $ZTCP0
192.168.109.220 on $ZTC0
192.168.109.222 on $ZTC0
192.168.109.223 on $ZTC0
192.168.109.224 on $ZTC0
192.168.101.223 on $ZTCP1
192.168.109.221 on $ZSM1
192.168.108.200 on $zxtr
Do you wish to enter IP addresses manually (y/n) [default Y] ?
:y
IP address: 192.168.108.200
Process: $zxtr
Note. If the same IP address appears on multiple NonStop TCP/IP processes, you must select
it on only one of the TCP/IP processes.