NSM/web Installation Guide

Installation (T2806ABA and Superseding SPRs)
HP NonStop NSM/web Installation Guide—529994-002
1-11
12. Verify Your Entries
Do you wish to enter another IP address manually (y/n) [default
Y] ? :n
Please select the IP addresses on which you want NSM/web to be
installed:
192.168.101.221 on $ZTCP0 (y/n) [default N] ? :y
192.168.109.220 on $ZTC0 (y/n) [default N] ? :y
192.168.109.222 on $ZTC0 (y/n) [default N] ? :y
192.168.109.223 on $ZTC0 (y/n) [default N] ? :y
192.168.109.224 on $ZTC0 (y/n) [default N] ? :y
192.168.101.223 on $ZTCP1 (y/n) [default N] ? :y
192.168.109.221 on $ZSM1 (y/n) [default N] ? :y
192.168.108.200 on $zxtr (y/n) [default N] ? :y
NSM/web WILL NOT be installed on these IP addresses:
NSM/web WILL be installed on these IP addresses:
192.168.101.221 on $ZTCP0
192.168.109.220 on $ZTC0
192.168.109.222 on $ZTC0
192.168.109.223 on $ZTC0
192.168.109.224 on $ZTC0
192.168.101.223 on $ZTCP1
192.168.109.221 on $ZSM1
192.168.108.200 on $zxtr
Are you done selecting IP addresses (y/n) [default N] ? :y
192.168.101.221 on $ZTCP0
192.168.109.220 on $ZTC0
192.168.109.222 on $ZTC0
192.168.109.223 on $ZTC0
192.168.109.224 on $ZTC0
192.168.101.223 on $ZTCP1
192.168.109.221 on $ZSM1
192.168.108.200 on $zxtr
========================================================
You can use CTRL+Z at any prompt to stop this installer.
You can then use an appropriate fg command to resume it
in the foreground or an appropriate kill command to
terminate it.
========================================================
12. Verify Your Entries
Check the current configuration settings, and decide if you want to change any of
them:
CURRENT SETTINGS
================
OSS root directory : /usr/tandem/lobsterServers
Webserver root directory : /usr/tandem/webserver/root/lobster
Guardian subvol : /G/system/lobster