NSM/web Installation Guide

Installation (Pre-T2806ABA SPRs)
HP NonStop NSM/web Installation Guide—529994-002
2-6
9. Enter the Home Terminal for Servers
9. Enter the Home Terminal for Servers
Enter the server home terminal for the NSM/web servers, or leave it blank to use the
default:
Server home terminal
====================
The home terminal for NSM/web servers.
It will not be used but must exist and be available for output.
ENTER the home terminal here or leave blank to use the current
value $ZHOME:
Checking for existing $ZHOME ...
Process $ZHOME exists.
10. Enter the NonStop TCP/IP Process Name
Enter the NonStop TCP/IP process name for the NSM/web server, or leave it blank to
use the default. This example specifies the TCP process name $ZTC0:
TCPIP process name
==================
Specifies your web server TCPIP process name.
ENTER the TCP process name here or leave blank to use the
current value $ZTC0 :
Checking for existing process $ZTC0 ...
Process $ZTC0 is running.
11. Enter the IP Address for Servers
Enter the IP address that the NSM/web servers use, or leave it blank to use the
default. This example uses the TCP process name $ZTC0 that was specified in Step
10:
IP Address
================
Specifies the IP address the NSM/web servers will use.
Must be a numeric IP address for $ZTC0. You may not use a DNS
name
ENTER the TCP process name here or leave blank to use the
current value 127.0.0.1 : 192.168.109.225
Checking $ZTC0 for IP address 192.168.109.225 ...
$ZTC0 has IP address 192.168.109.225.
CURRENT SETTINGS
================
OSS root directory : /usr/tandem/NSMweb/lobster
Webserver root directory :
/usr/tandem/webserver/root/NSMweb/lobster
Guardian subvol : /G/SYSTEM/lobster
Pathmon name : $ZLOB
Server cpu : 2