ODBC Server Installation and Management Manual

Using the NonStop ODBC Server Configuration
Manager
HP NonStop ODBC Server Installation and Management Manual—429395-002
3-42
Close the User Configuration window.
1. Choose User from the Configuration menu in the main window.
2. Click the Add control tab in the User Configuration window.
a. Type SOFTWARE_CORE1 in the User Name field,
b. Type SOFTWARE.CORE1 in the Guardian Name field,
c. Type PROFILE_CORE1 in the Profile field.
d. Click the Apply button.
e. Click NO for the Update System Configuration dialog.
f. Click OK for the SQL SUCCESS message.
3. Repeat Step 2 using the following values:
4. Repeat Step 2 using the following values:
5. Repeat Step 2 using the following values:
6. Repeat Step 2 using the following values:
Close the User Configuration window.
Step Three: Add the Net Service Configuration
The next step is to configure the network service.
User Name SOFTWARE_CORE2
Guardian Name SOFTWARE.CORE2
Profile PROFILE_CORE2
User Name SOFTWARE_CORE3
Guardian Name SOFTWARE.CORE3
Profile PROFILE_CORE3
User Name SOFTWARE_CORE4
Guardian Name SOFTWARE.CORE4
Profile PROFILE_CORE4
User Name SOFTWARE_CORE5
Guardian Name SOFTWARE.CORE5
Profile PROFILE_CORE5
Note. Although the steps in this configuration session are ordered in the optimum sequence to
minimize warning messages for integrity violations, you will receive such a warning when
configuring the net service because of unavoidable interdependencies. You can safely ignore
the warning message.