ODBC Server Installation and Management Manual

Using the NonStop ODBC Server Configuration
Manager
HP NonStop ODBC Server Installation and Management Manual—429395-002
3-43
Step Three: Add the Net Service Configuration
If you are using TCP/IP or SPX/IPX, configure your net service as follows (the
information needed for these attributes can be found in existing Tedit SCS
configuration files such as SCSCFGT1):
1. Choose Net Service from the Configuration menu in the main window.
2. Click the Add control tab in the Network Service Configuration window.
3. Type in the following values for the specified fields:
4. Click the Protocol button.
5. Click the TCP/IP control tab in the Network Protocol Configuration window.
6. Type in the following values for the specified fields:
7. Click the Close button in the Network Protocol Configuration window.
8. Click the Apply button.
9. Click NO for the Update System Configuration dialog.
10. Click OK for the SQL SUCCESS message.
11. Click the Close button in the Network Service Configuration window.
If you are using NETBIOS, configure your net service as follows (the information
needed for these attributes can be found in existing Tedit SCS configuration files such
as SCSCFGT1):
1. Choose Net Service from the Configuration menu in the main window.
2. Click the Add control tab in the Network Service Configuration window.
SCS Name $SCSN
Net Protocol TCP/IP or SPX/IPX
Net Name ODBCTCP008 or ODBCIPX006 (exactly as it appears
in the services file)
IOP Name $ZTC0 (if conventional TCP/IP) or NV1
<parallel tcp/ip process name> (if parallel TCP/IP)
ServiceFileName $vol.subvol.services (the location of the services file)
Keep Alive 0 (zero)
Oob In Line 0 (zero)
Linger 0 (zero)
Re Use Addr 0 (zero)