ODBC Server Installation and Management Manual

Using the NonStop ODBC Server Configuration
Manager
HP NonStop ODBC Server Installation and Management Manual—429395-002
3-49
Starting and Verifying the SCS
8. Repeat Steps 2 through 6, using the following values:
9. Repeat Steps 2 through 6, using the following values:
10. Repeat Steps 2 through 4, using the following values:
11. Click YES for the Update System Configuration dialog.
12. Click OK for the SQL SUCCESS message.
13. Click the Close button for the Umap Configuration screen.
Starting and Verifying the SCS
To start the newly configured SQL Communication Subsystem $SCSN from
ODBCTest, do the following:
1. Connect to the datasource ODBCDBA.
2. Execute the pass-through statement:
SELECT "TDM: UTIL START SCS $SCSN"
to start the SQL Communication Subsystem named $SCSN.
3. Execute the pass-through statement:
SELECT "TDM: UTIL STATUS SCS $SCSN"
to obtain the status for $SCSN. If the process is running, you will receive a
message stating that fact.
On the HP side, you can issue SCF commands to find the status of the SCS and the
server classes.
SCS Name $SCSN
Alias Name SOFTWARE_CORE3
ServerClass CLASSCORE3
SCS Name $SCSN
Alias Name SOFTWARE_CORE4
ServerClass CLASSCORE4
SCS Name $SCSN
Alias Name SOFTWARE_CORE5
ServerClass CLASSCORE5