ODBC Server Installation and Management Manual

HP NonStop ODBC Server Installation and Management Manual—429395-002
3-1
3
Using the NonStop ODBC Server
Configuration Manager
This section describes how to use the NonStop ODBC Server Configuration Manager
to set up the components for your server.
The NonStop ODBC Server Configuration Manager is a Windows application that
provides a graphical user interface to a NonStop ODBC Server configuration setup
process. You can use this tool to configure the mapping tables for a particular NonStop
ODBC Server user. The Configuration Manager provides these capabilities through a
multiple-document interface (MDI) that allows multiple copies of configuration windows
to be open simultaneously.
Operating Systems
The NonStop ODBC Server Configuration Manager can run under any of the following
operating systems:
•
Windows 95
•
Windows 98
•
Windows 2000
•
Windows XP
•
Windows NT
If you are using a 486 PC with 8 MB of RAM, you should not open more than four
configuration windows simultaneously. Opening more windows degrades performance,
and could cause an out-of-memory error, resulting in abnormal termination of the
NonStop ODBC Server Configuration Manager.
If you are using a Pentium PC with 16 MB or more of RAM and no other applications
are running, you can open all 13 configuration windows. However in general, the more
windows open, the slower the performance of the NonStop ODBC Server
Configuration Manager.