ODBC Server Messages Manual

TACL Messages
NonStop ODBC Server Messages Manual—429394.001
3-3
Recovery. Check that the value for SWAPVOL in the configuration file is a valid disk
(volume) name. Correct formats for disk names are given at the beginning of this
subsection. Correct the value and reissue the start command.
35134
Cause. The configuration file has not been updated to match the current system on
which SCS is installed.
Effect. SCS fails to start.
Recovery. Change the SWAPVOL parameter in the configuration file to reference an
existing disk volume. Reissue the start command.
35135
Cause. The value for the PRIORITY parameter in the configuration file is not numeric.
Effect. SCS fails to start.
Recovery. Change the PRIORITY parameter value in the configuration file to be a
number in the range from 1 to 199.
35136
Cause. The PRIORITY parameter in the configuration file is less than 0 or greater than
199.
Effect. SCS fails to start.
Recovery. Change the value of the PRIORITY parameter in the configuration file to be
a number in the range from 1 to 199.
35137
Cause. The name specified for PROCESS-NAME in the configuration file is not in the
correct format for an operating system process name.
Effect. SCS fails to start.
The SQLCSSWAPVOL disk-name does not exist
The value specified for SQLCSPRIORITY is not a number
The PRIORITY specified for SQLCS process is less than 0 or
greater than 199
The value specified for the SQLCS PROCESS-NAME is not a valid
process name