OmniMessaging EMS Operator's Manual 1.8

OmniMessaging EMS Operator’s Guide
Opsol Confidential and Proprietary 61
EMS Message: 02-07-02 10:03:49 \S702WEB.$Y1YA TANDEM.NSIM.G06 000205 Process POP3
\S702WEB.$Y1YA Initialization Error <error> <The server class name must be specified.> Pathmon:
\S702WEB.$OMNID
Cause: The NSIM-SERVER-CLASS param is missing.
Corrective Action: Specify the NSIM-SERVER-CLASS param in the server configuration.
EMS Message: 02-07-02 10:03:49 \S702WEB.$Y1YA TANDEM.NSIM.G06 000205 Process POP3
\S702WEB.$Y1YA Initialization Error <error> < The Inactivity time-out value out of range, Setting it to
default 10 mins.> Pathmon: \S702WEB.$OMNID
Cause: The Inactivity time-out value specified in the server configuration is out of range.
Corrective Action: Set the Inactivity timer value within range (0-120 mins).
EMS Message: 02-07-02 10:03:49 \S702WEB.$Y1YA TANDEM.NSIM.G06 000205 Process POP3
\S702WEB.$Y1YA Initialization Error <error> < The Logon time-out value out of range, Setting it to
default 10 seconds.> Pathmon: \S702WEB.$OMNID
Cause: The Logon time-out value specified in the server configuration is out of range.
Corrective Action: Set the Logon timer value within range (0-300 secs).
EMS Message: 02-07-02 10:03:49 \S702WEB.$Y1YA TANDEM.NSIM.G06 000205 Process POP3
\S702WEB.$Y1YA Initialization Error <error> < The max-sessions value out of range.> Pathmon:
\S702WEB.$OMNID
Cause: The max-sessions value out of range.
Corrective Action: Set the max sessions value within range (1-256).
EMS Message: 02-07-02 10:03:49 \S702WEB.$Y1YA TANDEM.NSIM.G06 000205 Process POP3
\S702WEB.$Y1YA Initialization Error <error> <Non-existent instance Id specified.> Pathmon:
\S702WEB.$OMNID
Cause: The OMNI-INSTANCE-NAME param specified is invalid.
Corrective Action: Specify the correct OMNI-INSTANCE-NAME.
EMS Message: 02-07-02 10:03:49 \S702WEB.$Y1YA TANDEM.NSIM.G06 000205 Process POP3
\S702WEB.$Y1YA Initialization Error <error> <OMNI-OPSW-REQUESTOR.> Pathmon:
\S702WEB.$OMNID
Cause: Param OMNI-OPSW-REQUESTOR not specified.
Corrective Action: Specify the OMNI-OPSW-REQUESTOR param in server configuration.
EMS Message: 02-07-02 10:03:49 \S702WEB.$Y1YA TANDEM.NSIM.G06 000205 Process POP3
\S702WEB.$Y1YA Initialization Error <error> <OMNI-OPSW-SERVER.> Pathmon: \S702WEB.$OMNID
Cause: Param OMNI-OPSW-SERVER not specified.
Corrective Action: Specify the OMNI-OPSW-SERVER param in server configuration.
6.7 EMS Message 206
This EMS event is displayed in the primary collector.
EMS Message: 02-07-08 18:33:53 \NSK.$Z1PM TANDEM.NSIM.G06 000206 OMNI Process POP3
\NSK.$Z1PM Unexpected network termination <send operation timed-out.> IP Address: <IpAddr>
AssocID: <AssocId> Pathmon: \NSK.$ZLE
Cause: Unexpected network termination
Corrective Action: Contact opsol support.
EMS Message: 02-07-08 18:33:53 \NSK.$Z1PM TANDEM.NSIM.G06 000206 OMNI Process POP3
\NSK.$Z1PM Unexpected network termination < Connection reset by peer.> IP Address: <IpAddr>
AssocID: <AssocId> Pathmon: \NSK.$ZLE
Cause: Unexpected network termination
Corrective Action: Contact Opsol support.
EMS Message: 02-07-08 18:33:53 \NSK.$Z1PM TANDEM.NSIM.G06 000206 OMNI Process POP3
\NSK.$Z1PM Unexpected network termination < Inter Instance send operation timed-out.> IP Address:
<IpAddr> AssocID: <AssocId> Pathmon: \NSK.$ZLE
Cause: Unexpected network termination
Corrective Action: Contact Opsol support.