OmniMessaging Installation Guide 1.7

OmniMessaging Installation Guide
07/22/04 Opsol Integrators Inc. Confidential and Proprietary 24
Configurable only for RELAY server.
All other MTA serverclasses use default
300 seconds.
OMNI-X-DUD-REQ-TIMEOUT 300 MTA or RELAY will time out if DUD does not
reply back within this set value. It must be
between 90 secs. to 900 secs.
OMNI-X-FILTER-KEYWORD a Used to filter recipient addresses for keywords
such as “TELEX=”, “FAX=”. Only required
for MTA.
OMNI-MTA-X-ENABLE-DUD-
INTERFACE
i This param enables interface with the DUD
server if set to “a”. Default is “i”. It is used by
MTA, RELAY and RELAYD server classes.
NSIM-X-SCAN-HOST-FILE i If this param is set to “a”, the server scans the
HOST file directly instead of going to DNS
server. Default is “i”. It is used by MTA,
RELAY and RELAYD server classes.
OMNI-MTA-X-ENABLE-DSN a Enables the Delivery Status Notification (DSN)
functionality support. Used by RELAY and
RELAYD server classes.
For DIST:
Server Param Suggested /
Default Value
Description
NSIM-X-DIST-TCP-RETRY-DELAY 5 sec Retry Time if error in communicating to
TCP/IP
NSIM-X-DIST-TCP-REPORT-INTERVAL 60 sec Time interval between TCP/IP reports
NSIM-X-DIST-SRV-RETRY-DELAY 5sec Time interval between errors talking to
the distributor process
NSIM-X-DIST-SRV-REPORT-INTERVAL 60sec Time interval between Server reports