Open System Services Installation Guide (G06.24+, H06.03+, J06.03+)

OSS EasySetup Quickstart
Open System Services Installation Guide—429954-004
1-3
Required Terminal Emulator
Required Terminal Emulator
The OSSSETUP utility requires a terminal emulator such as one of these:
•
Telnet session
•
6530 terminal emulator
•
X6530 terminal emulator
•
OutsideView from Crystal Point Inc.
•
MR-Win6530 from com.forte
OSSSETUP will not execute under sessions such as the start-up TACL window (the
CLCI window, $YMIOP.#CLCI).
Caution. The files in Table 1-1 on page 1-2 and Table 1-2 on page 1-2 are EDIT files (file code
101), not object files. Nothing prevents you from changing these files; however, HP
recommends that you change only the OSSINFIL file (for instructions, see the Open System
Services Management and Operations Guide). Avoid changing the OSSINF file, because the
changes might be overwritten by future software updates.
Figure 1-1. OSSINF File Contents
* File: OSS Monitor in-file ( Version 1.0 ) {<--MUST BE FIRST LINE OF FILE }
* This is an in-file for the OSS T0585 utilities STARTOSS and OSSSETUP. The
* OSS Monitor process manages all entries in this file.
* There is no need to refer to any name server or transport agent server.
* Name servers are automatically started when their corresponding filesets
* are started. Transport agent servers are started when a processor is
* reloaded.
* NOTE: Add an asterisk followed with a space in front of a line to prevent
* that server or fileset from being started.
* Format for server entry: SERVER #<name>
* Format for fileset entry: FILESET <name>
* Start the OSS Message Queue Server:
SERVER #ZMSGQ
* Start the OSS Local Server:
SERVER #ZPLS
* Add additional filesets to the end of this file. Starting order
* of filesets must be maintained. An incorrect order can cause
* filesets not to start. Do not use a hash mark (#) in fileset names.
* Start the OSS ROOT, HOME and TEMP Filesets:
FILESET ROOT
FILESET HOME
FILESET TEMP