Open System Services Installation Guide (G06.24+, H06.03+, J06.03+)

OSSSETUP Utility
Open System Services Installation Guide—429954-004
2-7
Running in Interactive Mode
Assigning the value -1 to the second processor tells the system not to configure a
backup processor.
8. If you responded No in Step 2, go to Step 10.
9. If you responded Yes in Step 2, OSSSETUP displays this prompt:
In which pair of processors would you like the HOME fileset
name server ($ZPNH) to execute? [2 3]:
Either enter two different processor numbers separated by a space or press Return
to accept the default processor numbers, shown in the brackets [ ]. The first
processor number (for the primary processor) must be an integer in the range 0
through 15. The second processor number (for the backup processor) must be an
integer in the range -1 through 15. At least one of these processors must be active.
Assigning the value -1 to the second processor tells the system not to configure a
backup processor.
10. OSSSETUP displays this prompt:
On which disk volume is the ZOSSUTL installation subvolume
located? [$SYSTEM]
Enter the name of the volume where the ZOSSUTL subvolume is.
11. OSSSETUP displays status messages (similar to those shown in Example 2-4 on
page 2-10) and a table like the one shown in Example 2-3.
Respond either Yes or No (case is ignored) or by pressing Return (which is
equivalent to responding No). If unsure, respond No.
This step creates storage-pool files that define the creation pools for filesets. The
storage-pool files are created in the OSS Monitor database subvolume
$SYSTEM.ZXOSSMON.
Example 2-3. Subsystem Settings Table: Filesets, Mount Points, and Associated
Name Servers
OSS CONFIGURATION SUMMARY
Subsystem Settings for \NODE1
Filesets, Mount Points and Associated Name Servers
Fileset Name Catalog Mount Pool Space Volume(s)
ROOT $ZPNS $WORK / $WORK $OSS $KAOSR20 $KAOSR17
$G0608 $G0607 $G0606 $G0501
$BOAT $AUDIT2 $AUDIT1
HOME $ZPNH $OSS /home $WORK $OSS $KAOSR20 $KAOSR17
$G0608 $G0607 $G0606 $G0501
$BOAT $AUDIT2 $AUDIT1
TEMP $ZPNS $KAOSR20 /tmp $KAOSR20
$ZZSTO.INTERNAL-DISK profile setting for OSSCaching: ON
Do you want to configure the OSS filesets as shown above? <yes/[NO]>: