Open System Services Management and Operations Guide (G06.25+, H06.03+)

ManualsBrandsHP ManualsServerHP NonStop G-Series

101

102

103

104

105

106

107

108

109

110

Managing Servers

Open System Services Management and Operations Guide—527191-002

4-8

Configuration Files Used for the OSS Name Servers

This attribute increases the risk of losing file labels if the entire disk-process pair

for the volume fails. This option is usually used only for a volume that will contain

temporary files.

When a default ZOSSFSET file is created by the OSS Monitor on a system that was

not previously configured, it contains only an entry for a prototype root fileset with the

device label 000000. The prototype root fileset does not contain a valid catalog disk

volume name or a valid storage-pool file filename. You must use the SCF ALTER

FILESET command to provide that information before the root fileset can be mounted

and before you can use the TACL PINSTALL utility or COPYOSS macro successfully.

Beginning with RVU G06.10, when HP shipped a system with the OSS environment

preconfigured, ZOSSFSET contained a complete root fileset entry. This entry differed

slightly from the default attribute values, as follows:

In the following table, disk1, disk2, and disk3 refer to the first three disk volumes

from the set of volumes available for use in storage-pool files.

When HP ships a system with the OSS environment preconfigured or you use the

OSSSETUP utility to configure your system and accept all defaults, ZOSSFSET

currently contains the following listed initial fileset entries. The root fileset entry differs

slightly from the default attribute values provided by the OSS Monitor:

Attribute

Default Values When

ZOSSFSET Is Created

by the OSS Monitor

Initial Values When ZOSSFSET

Was Delivered on a Preconfigured

System

Fileset name ROOT ROOT

Device label 000000 000000

Storage-pool file None ZINSPOOL

Catalog volume None $OSS

Mount point / /

OSS name server name #ZPNS #ZPNS

AUDITENABLED OFF OFF

BUFFERED NONE LOG

READ-ONLY FALSE FALSE

Attribute Fileset Fileset Fileset (page1of2)

Fileset name ROOT HOME

TEMP

Device label 000000 000001

000002

Storage-pool file ROOTPOOL HOMEPOOL

TEMPPOOL