Open System Services Management and Operations Guide (G06.25+, H06.03+)

Open System Services Monitor
Open System Services Management and Operations Guide—527191-002
12-80
STATUS SERVER Command
time2
is the timestamp for the time when the last error for the server was reported, in the
form dd mmm yyyy hh:mm:ss.mil. If no error has been reported, this value is
the same as the time1 value.
The following fields are displayed only when an OSS name server is in the STARTED
state:
time3
is the timestamp for the time when the OSS name server was last synchronized
with ZPOSFSERV, in the form dd mmm yyyy hh:mm:ss.mil. If a CONTROL
SERVER command with the SYNC option has not been issued since the OSS
name server was last started, this field is blank.
status
indicates whether the configuration of the OSS name server has changed after its
most recent start or synchronization with ZOSSSERV:
processor1
indicates the processor in which the primary copy of the OSS name server process
runs.
processor2
indicates the processor in which the backup copy of the OSS name server process
runs.
time4
indicates the number of seconds that the OSS name server waits for a response
from SQLCAT to a request.
size1
indicates the number of inodes that the OSS name server is allowed to cache.
size2
indicates current inode cache usage by the OSS name server, displayed as the
number of entries in use and as a percentage of size1.
size3
indicates the most recent highwater mark for inode cache use, displayed as the
number of entries used and as a percentage of size1.
Value Meaning
FALSE The OSS name server configuration has not changed.
TRUE The OSS name server configuration has changed.