Open System Services Management and Operations Guide (G06.25+, H06.03+)

Open System Services Management and Operations Guide—527191-002
A-1
A Messages
Status, warning, and error messages are sent to the console by:
•
The Open System Services (OSS) EasySetup utilities. These messages are
described under OSS EasySetup Utility Messages on page A-2.
•
The Guardian Catalog Volume Tool (CVT) utility. These messages are described
under CVT Messages on page A-3.
•
The FSCK fileset integrity checker when the Subsystem Control Facility (SCF)
DELETE FILESET or DIAGNOSE FILESET command is used. These messages
are described under FSCK Messages on page A-6.
•
The OSS Monitor process at startup. These messages are described under
Unnumbered Messages on page A-31.
•
The OSS product module (OSS PM) when SCF commands are used. These
messages are described under Numbered Messages on page A-38.
•
The OSSTTY utility at startup. These messages are described under Startup
Messages on page A-96.
Event Management Service (EMS) event messages are issued by:
•
The OSS message-queue server, under the NonStop Kernel subsystem ID. These
messages are described under OSS Message-Queue Server Messages on
page A-27.
•
The OSS Monitor, under the OSS subsystem ID. These messages are described
under OSS Subsystem Messages on page A-61.
•
An OSS name server, under the OSS subsystem ID. These messages are
described under OSS Subsystem Messages on page A-61.
•
The FSCK fileset integrity checker, under the OSS subsystem ID, when the SCF
DIAGNOSE FILESET command is used. These messages are described under
OSS Subsystem Messages on page A-61.
•
The OSS sockets local server, under the OSS subsystem ID. These messages are
described under OSS Subsystem Messages on page A-61.
•
The OSS EasySetup utilities or OSS server processes such as inetd, under the
OSS subsystem ID. These messages are described under OSS Subsystem
Messages on page A-61.
•
The OSSTTY server, under its own subsystem ID. These messages are described
in EMS Messages on page A-100.
The OSS, OSSTTY, and NonStop Kernel subsystems generate EMS event messages
that are common to many SCF product modules. Such messages are described in the
SCF Reference Manual for G-Series RVUs or the SCF Reference Manual for H-Series
RVUs and are not described in this guide. Such messages have negative message