Open System Services Management and Operations Guide (G06.25+, H06.03+)

Messages
Open System Services Management and Operations Guide—527191-002
A-58
Numbered Messages
55
inuseinodes
is the current number of inodes in use.
fileset
identifies the affected fileset.
Cause. A Subsystem Control Facility (SCF) CONTROL FILESET command was
entered, but the specified MAXINODES value is lower than the current number of
inodes in use.
Effect. The command is not processed.
Recovery. Use the ALTER FILESET command to change the MAXINODES value to a
value greater than the current number of inodes in use and reissue the CONTROL
FILESET command with the SYNC option.
56
server
identifies the affected server process.
Cause. A Subsystem Control Facility (SCF) CONTROL SERVER command was
entered, but the processor specified by its CPU attribute is down.
Effect. The command is not processed.
Recovery. Use the ALTER SERVER command to change the CPU attribute, and
reissue the CONTROL SERVER command with the SYNC option.
57
server
identifies the affected server process.
Cause. A Subsystem Control Facility (SCF) CONTROL SERVER command was
entered, but the processor specified by its BACKUPCPU attribute is down.
OSS E00055 The MAXINODES value is lower than the number of
currently inuse inodes inuseinodes for the fileset fileset.
OSS E00056 The primary Name Server server failed to migrate
to the processor specified by the CPU attribute.
OSS E00057 The backup Name Server server failed to migrate to
the processor specified by the BACKUPCPU attribute.