Open System Services Management and Operations Guide (G06.25+, H06.03+)

Messages
Open System Services Management and Operations Guide—527191-002
A-61
OSS Subsystem Messages
OSS Subsystem Messages
The messages in this subsection are EMS messages issued by processes running
under the OSS subsystem ID. Such processes include:
•
The OSS EasySetup utilities, to report processing status using message 10
•
The OSS Monitor
•
An OSS name server
•
The OSS sockets local server
•
Processes running in the OSS environment; in particular, messages 5 through 12
are used by:
°
Network services servers such as the inetd process (see message 8)
°
The OSS shell when the logger command is used
°
Applications running in the OSS environment that call the syslog() function
This guide documents the basic message format for messages 5 through 12, but it
documents actual message text only for HP programs that use this feature; site-written
OSS applications can also use the syslog() function.
-3
object
is one of the following:
fileset
is the name of a fileset, represented as a subdevice of the OSS Monitor
process $ZPMON.
process
is the name of the FSCK utility process, represented as a subdevice of the
OSS Monitor process $ZPMON.
server
is the name of an OSS server process, represented as a subdevice of the OSS
Monitor process $ZPMON.
old
is the previous state of the object. This state depends on the object.
Note. Negative-numbered messages are common to most subsystems. If you receive a
negative-numbered message that is not explained in this subsection, refer to the description of
the “COM-KRNL (Common) Messages” in the Operator Messages Manual.
object, STATE changed from old to new reason