Open System Services Management and Operations Guide (G06.25+, H06.03+)

Messages
Open System Services Management and Operations Guide—527191-002
A-99
Startup Messages
Effect. OSSTTY is running without a backup copy and cannot provide the fault
tolerance of a process pair.
Recovery. This is an informative message only; no action is needed unless the
backup process is required by your site procedures. The OSSTTY process can be
stopped and restarted after the problem is corrected.
Cause. The OSSTTY command was entered without any of the redirection target
specifications (IN, OUT, or TERM).
Effect. OSSTTY is running but has no apparent function to perform other than
providing duplication of the terminal interface of the Telserv process. OSS application
response time will be slower than for direct access of terminals through the Telserv
process.
Recovery. This is an informative message only; no action is needed.
parameter
indicates the command flag that was not recognized.
Cause. The OSSTTY command was entered with a flag that is not recognized. The
most common cause of this message is a typographical error in the command line.
Effect. OSSTTY is not running.
Recovery. See Starting OSSTTY on page C-1 for a description of the valid values and
flags for the OSSTTY command. Reenter the command with a corrected flag or value.
coll_name
indicates the process name specified in the command.
error_number
indicates the Guardian file-system error returned by the underlying call to the
Guardian FILE_OPEN_ procedure. For more information about this error, refer to
the Guardian Procedure Errors and Messages Manual.
OSSTTY: ****Warning**** All the three re-directional targets
are TELSERV terminals, which are accessible directly.
Continuing...
OSSTTY: Invalid parameter: parameter
OSSTTY: ****Warning**** EMS Collector coll_name is not
accessible, error error_number, Using $0 as the EMS
collector.