Open System Services Management and Operations Guide (G06.27+, H06.04+)

Messages

Open System Services Management and Operations Guide—527191-003

A-31

Unnumbered Messages

Unnumbered messages can appear during startup of the OSS Monitor. Each message

is prefixed by Subsystem Programmatic Interface (SPI) termination information in the

following form:

processname

is the name of the failed process. Unless otherwise indicated in the specific

message description, this name is always $ZPMON.

interval

is the elapsed time since the start of the failed process, in the form

dd mmm yyyy hh:mm:ss.mil.

code

is the SPI error code of the failure. Values for this are indicated in the specific

message descriptions.

release

is the major release version identifier for the failed process. For example, the

version of the OSS Monitor in the D44.00 release version update (RVU) has the

release value D40.

text-message

is the unnumbered message that describes the cause of the failure.

The possible text messages are described on the following pages in alphabetic order.

Cause. The OSS Monitor detected an invalid value for the AUTOSTART PARAM

during startup.

Effect. The OSS Monitor terminates. The existing AUTOSTART attribute value for the

subsystem is unchanged.

Recovery. Restart the OSS Monitor with a correct value, as indicated in the message.

ABENDED: processname

CPU time: interval

3: Premature process termination with fatal errors or

diagnostics

Termination info: code

Subsystem: TANDEM.143.release

text-message

Invalid value specified for the AUTOSTART PARAM -- must be

AUTO or MANUAL