Open System Services Management and Operations Guide (G06.29+, H06.07+)

Managing Filesets
Open System Services Management and Operations Guide—527191-005
5-28
FSCK Log File
The volume list shown in the Phase I output (see Figure 5-4 on page 5-27) is a list of
all disk volumes associated with the fileset. This list is automatically added to the
superblock or updated when FSCK is run. The volume list is used by the OSS name
server for that fileset to refresh information about file opens within that fileset.
When you use the DIAGNOSE FILESET command with the STATUS option, FSCK
writes a status report to its log file that describes:
•
The current state of the fileset as recorded in the mounted field in the superblock
for the fileset
•
Whether the OSS name server used for that fileset is a current version of the
software
If the DETAIL option is also used, the mounted field contents are displayed in
hexadecimal. Possible values are:
FSCK - T8621G09 - (15DEC2001) OSS Fileset Validate/Repair Utility
Copyright Compaq Computer Corporation 1994, 1995, 1996, 2001
August 31,2001 01:14:53
Options Selected are: CATALOG $OSS.ZX000000, STATUS, ROOT
Catalog Subvolume is \NODE1.$OSS.ZX000000
PHASE I -- Verify Super Block
Catalog Version 2
The fileset is marked as Mounted with BUFFERED LOG by a down-rev Name Server
The Name Server has detected no inconsistencies in this fileset
Volume List:
$OSS1
FSCK Completed
Minor Inconsistencies: 0
Serious Inconsistencies: 0
Warnings: 0
Errors: 0
August 31,2001 01:14:53
Value Mounted state
0x0000 The fileset is unmounted.
0x0001 The fileset is being recovered.
0x0002 The fileset is mounted in BUFFERED LOG mode by an OSS name server
that is not running the current code version.
0x0006 The fileset is mounted in BUFFERED CREATE mode by an OSS name
server that is not running the current code version.
0x2004 The fileset is mounted in BUFFERED CREATE mode.
0x2010 The fileset is mounted in READONLY TRUE mode.
Figure 5-4. FSCK Log File Examples (page 2 of 2)