Open System Services Management and Operations Guide (G06.29+, H06.07+)

Open System Services Monitor
Open System Services Management and Operations Guide—527191-005
12-58
INFO SUBSYS, INFO MON, and INFO PROCESS
Commands
seconds
specifies the number of seconds that the OSS Monitor waits for the server’s
primary processor to become available during an automatic restart. Valid values
are 0 through 600.
state
specifies the desired state of the server after the next time the automatic startup
service is used. Valid values are STARTED or STOPPED.
tries1
specifies the number of times that the OSS Monitor attempts to restart the server
when the automatic startup service is used. Valid values are 0 through 10.
tries2
specifies the number of times that the OSS Monitor actually restarted the server
during the previous 10 minutes.
Example
To obtain a detailed report of the configuration of the server $ZPNS and send
informational messages to the file CMDLOG, enter the following command:
INFO /OUT CMDLOG/ SERVER $ZPMON.#ZPNS, DETAIL
A display such as the following is written to CMDLOG:
INFO SUBSYS, INFO MON, and INFO PROCESS Commands
The INFO SUBSYS, INFO MON, and INFO PROCESS commands all display
information about the OSS subsystem. The information displayed is from the
ZOSSPARM file.
OSS Detailed Info SERVER \NODE1.$ZPMON.#ZPNS
Type.................... NAME
*CPU..................... 1
*BackupCPU............... 0
CreateBy................ $ZPMON
CreateTime.............. 12 Dec 2001 13:28:28.331
AlterBy................. SUPER.SUPER
AlterTime............... 03 Mar 2002 01:29:14.123
*Params.................. INODECACHE 4096, LINKCACHE 4096, SQLTIMEOUT 60
*BackupCPUOK............. TRUE
*MaxWaitTime............. 60
*DesiredState............ STARTED
*AutoRestart............. 3
PersistenceCount........ 3