Open System Services Management and Operations Guide (G06.29+, H06.07+)

Open System Services Monitor
Open System Services Management and Operations Guide—527191-005
12-68
STATUS FILESET Command
SEL [ NOT ] state
directs the command to apply only to filesets that are in the specified state or, when
the NOT field is used, only to filesets that are not in the specified state. Valid
values for state are:
The information returned for a summary report has the following format:
fileset-devicename
is the name of the fileset whose status is displayed, shown as a device of the OSS
Monitor process.
filesetname
is the name of the fileset whose status is displayed.
state
describes the state of the fileset.
error
is the error number of the last OSS Monitor error that occurred during an operation
on the fileset. See Numbered Messages on page A-35 for an explanation of a
specific error number.
error-detail
is the error number of the Guardian file-system error (if any) reported with the
error value. For information about Guardian file-system errors, see the Guardian
Procedure Errors and Messages Manual.
Value Meaning
DIAGNOSING The fileset is being diagnosed by the FSCK utility.
STARTED The fileset is started (mounted).
STOPPED The fileset is ready to be started (mounted) or diagnosed.
UNKNOWN The fileset is in an unknown state.
OSS Status FILESET fileset-devicename
FilesetName State LastError ErrorDetail
filesetname state error error-detail
Value Meaning
DIAGNOSING The fileset is being diagnosed by the FSCK utility.
STARTED The fileset is started (mounted).
STOPPED The fileset is ready to be started (mounted) or diagnosed.
UNKNOWN The fileset is in an unknown state.