Open System Services Management and Operations Guide (G06.29+, H06.07+)

Open System Services Monitor
Open System Services Management and Operations Guide—527191-005
12-77
STATUS SERVER Command
SEL [ NOT ] state
directs the command to apply only to servers that are in the specified state or,
when the NOT field is used, only to servers that are not in the specified state. Valid
values for state are:
The information returned for a summary report has the following format:
server-devicename
is the server name of the server whose status is displayed, shown as a device of
the OSS Monitor process.
servername
is the server name of the server whose status is displayed.
state
describes the state of the server.
error
is the error number of the last OSS Monitor error that occurred during an operation
on the server. See Numbered Messages on page A-35 for an explanation of a
specific error number.
error-detail
is the error number of the Guardian file-system error (if any) reported with the
error value. For information about Guardian file-system errors, see the Guardian
Procedure Errors and Messages Manual.
Value Meaning
STARTED The server is started.
STOPPED The server is ready to be started.
OSS Status SERVER server-devicename
ServerName State LastError ErrorDetail
servername state error error-detail
Value Meaning
STARTED The server process is running.
STOPPED The server process is not running.