Open System Services Management and Operations Guide (G06.29+, H06.07+)

Messages
Open System Services Management and Operations Guide—527191-005
A-17
FSCK Inconsistency and Error Messages
Recovery. If the REPAIR option was not specified or the REPAIR NONE option was
specified in the Subsystem Control Facility (SCF) DIAGNOSE FILESET command, the
catalog is still in an inconsistent state. Reissue the command with the REPAIR ALL
option.
If the REPAIR SERIOUS, REPAIR OPEN, or REPAIR ALL option was specified in the
command, this is an informational message only; no corrective action is needed.
208
nnn
indicates the number of affected inode numbers.
Cause. There are nnn inode numbers for which there were neither records in the
PXINODE file nor entries in the free inode tables.
Effect. These inode numbers are recorded as free in the new PXINODE file.
Recovery. If the REPAIR ALL option was not specified in the Subsystem Control
Facility (SCF) DIAGNOSE FILESET command, the catalog is still in an inconsistent
state. Reissue the command with the REPAIR ALL option.
If the REPAIR ALL option was specified in the command, this is an informational
message only; no corrective action is needed.
209
inode-number
indicates the affected inode.
For the MINOR message:
Cause. A record with the indicated invalid inode number as a key was found in the
current PXINODE file. The inode number falls within the range reserved for future
special inodes.
Effect. The record is assigned a currently unused inode number in the new PXINODE
file, and all links to and from the file are mapped to the new inode number. If the inode
represents a regular file, the corresponding ZYQ file is renamed to reflect the new
inode number.
Recovery. Informational message only; no corrective action is needed.
For the SERIOUS message:
MINOR 208 - There are nnn Inode Numbers Unaccounted For
{ MINOR | SERIOUS } 209 - Invalid Inode Number,
Inode=inode-number