Open System Services Management and Operations Guide (G06.29+, H06.07+)

Messages
Open System Services Management and Operations Guide—527191-005
A-28
Unnumbered Messages
processname
is the name of the failed process. Unless otherwise indicated in the specific
message description, this name is always $ZPMON.
interval
is the elapsed time since the start of the failed process, in the form
dd mmm yyyy hh:mm:ss.mil.
code
is the SPI error code of the failure. Values for this are indicated in the specific
message descriptions.
release
is the major release version identifier for the failed process. For example, the
version of the OSS Monitor in the D44.00 release version update (RVU) has the
release value D40.
text-message
is the unnumbered message that describes the cause of the failure.
The possible text messages are described on the following pages in alphabetic order.
Cause. The OSS Monitor detected an invalid value for the AUTOSTART PARAM
during startup.
Effect. The OSS Monitor terminates. The existing AUTOSTART attribute value for the
subsystem is unchanged.
Recovery. Restart the OSS Monitor with a correct value, as indicated in the message.
Cause. The OSS Monitor detected an invalid value for the AUTOSTART attribute on
its command line during startup.
Effect. The OSS Monitor terminates. The existing AUTOSTART attribute value for the
subsystem is unchanged.
Recovery. Restart the OSS Monitor with a correct value, as indicated in the message.
Invalid value specified for the AUTOSTART PARAM -- must be
AUTO or MANUAL
Invalid value specified on the command line for the AUTOSTART
attribute -- must be AUTO or MANUAL