Open System Services Management and Operations Guide (G06.29+, H06.07+)

Messages
Open System Services Management and Operations Guide—527191-005
A-37
Numbered Messages
•
Examine the load on the processor that is running the primary OSS name server
process, then do one or more of the following:
°
Increase the execution priority of the OSS name server process.
°
Start the OSS name server on a less-busy processor.
°
Increase the cache size for the OSS name server and restart the server.
3
process
is the process name of the OSS subsystem process that failed to start.
err
is the error number returned by the underlying call to the Guardian
PROCESS_CREATE_ procedure.
error-detail
is the error detail information returned by the underlying call to the Guardian
PROCESS_CREATE_ procedure.
Cause. During the execution of a Subsystem Control Facility (SCF) command, an
OSS name server process failed. This error most commonly occurs when the HP
NonStop operating system cannot start a server process.
Effect. If an OSS name server process fails, the OSS Monitor restarts that process
automatically.
Recovery. Perform one or more of the following actions:
•
Use the SCF INFO SERVER command to check for invalid information in the
configuration of the failing server.
•
Verify that the processors used by the server are running.
•
Check the server program file security permissions.
•
Look up the PROCESS_CREATE_ error information in the Guardian Procedure
Errors and Messages Manual. Correct the problem and start the server.
5
paramname
identifies the command parameter with the invalid value.
OSS E00003 Failed to start process -- error err, error-detail
OSS E00005 Invalid value for parameter paramname