Open System Services Management and Operations Guide (G06.29+, H06.07+)

OSS Management Utilities
Open System Services Management and Operations Guide—527191-005
C-2
Starting OSSTTY
Command
To run OSSTTY, enter this command:
NAME $process_name
specifies the Guardian process name for the OSSTTY process. HP recommends
$ZTTY.
If you omit this option, the name used is a randomly generated 4-character process
name created by the NonStop operating system.
IN stdin_redirection_target
specifies the Guardian process name for the process from which data for the OSS
standard input file should be read. The process specified must use device type 0,
1, or 6. This process appears as $process_name.#stdin to a process using the
Guardian file system or /G/process_name/#stdin to a process using the OSS file
system.
If you specify this option, the process cannot be a collector process or a spooler. If
you omit this option, the name used is the device name for the Telserv terminal
from which the command is entered.
OUT stdout_redirection_target
specifies the Guardian process name for the process or the Guardian file name for
the Guardian EDIT file to which data for the OSS standard output file should be
written.
A process specified must use device type 0, 1, or 6. The process appears as
$process_name.#stdout to a process using the Guardian file system or
/G/process_name/#stdout to a process using the OSS file system.
[RUN] OSSTTY
[ [/ NAME process_name, ]
[ IN stdin_redirection_target, ]
[ OUT stdout_redirection_target, ]
[ TERM stderr_redirection_target, ]
[ NOWAIT ] / ]
[ -access { ALL | OWNER } ]
[ -backupcpu processor ]
[ -coll collector ]
[ -help ]
[ -idletimeout seconds ]
[ -[no]prefixpid ]
[ -[no]quiet ]
[ -[no]server ]
[ -[no]wrap ]
[ -secure security_string ]