Open System Services Management and Operations Guide (G06.30+, H06.08+, J06.03+)

Configuration Database Files Used for the OSS Message-Queue Server
To start the OSS message-queue server, the OSS Monitor requires a ZOSSSERV file in the subvolume
$SYSTEM.ZXOSSMON.
The OSS Monitor creates a default ZOSSSERV file with a #ZMSGQ entry that specifies the
characteristics of the OSS message-queue server process, $ZMSGQ. To edit this file, use the SCF
ALTER SERVER command.
Beginning with RVU G06.10, when HP shipped a system with the OSS environment preconfigured,
the #ZMSGQ entry matched the default, as follows:
Initial Values When ZOSSSERV Is
Delivered on a Preconfigured System
Default Values When ZOSSSERV Is
Created by the OSS MonitorAttribute
00BACKUPCPU
11CPU
6553565535MSGMQB
3232MAXMQID
32 * MAXMQID = 102432 * MAXMQID = 1024MAXMSG
3200032000MSGMSIZE
#ZMSGQ#ZMSGQSERVER
MSGQMSGQTYPE
Beginning with RVU G06.15, when HP shipped a system with the OSS environment preconfigured
or you used the OSSSETUP utility to configure your system and accepted all defaults, ZOSSSERV
contained the following initial OSS message-queue server information:
Multiple-Enclosure SystemSingle-Enclosure SystemAttribute
30BACKUPCPU
21CPU
6553565535MSGMQB
3232MAXMQID
32 * MAXMQID = 102432 * MAXMQID = 1024MAXMSG
3200032000MSGMSIZE
#ZMSGQ#ZMSGQSERVER
MSGQMSGQTYPE
Beginning with RVU G06.17, when HP ships a system with the OSS environment preconfigured
or you use the OSSSETUP utility to configure your system and accept all defaults, ZOSSSERV
contains the following initial OSS message-queue server information:
Multiple-Enclosure SystemSingle-Enclosure SystemAttribute
33AUTORESTART
30BACKUPCPU
TRUETRUEBACKUPCPUOK
21CPU
STOPPEDSTOPPEDDESIREDSTATE
112 Managing Servers