Open System Services Management and Operations Guide (G06.30+, H06.08+, J06.03+)

FsckCPU processor
is the processor number of the processor in which the FSCK program runs when the SCF
DIAGNOSE FILESET or DELETE FILESET command is used and either no processor is configured
for the fileset or the processor configured for the fileset is unavailable.
Report filespec
is the Guardian filename or spooler location of the default FSCK log file.
ZOSSVol volume
is the name of the Guardian disk volume that contains the program files for the CVT utility, the
OSS Monitor, and other OSS components.
CreateBy user-name1
is the user name of the user or process that created the initial configuration of the subsystem.
CreateTime time1
is the timestamp for the time when the initial configuration of the subsystem was created, in
the form dd mmm yyyy hh:mm:ss.mil.
AlterBy user-name2
is the user name of the user who last modified the configuration or state of the subsystem.
AlterTime time2
is the timestamp for the last time that the subsystem configuration was changed, in the form dd
mmm yyyy hh:mm:ss.mil.
AutoStart setting
is the automatic startup service setting (AUTO or MANUAL) in effect for the next system load
or restart.
Considerations
• The only valid process_name is $ZPMON.
• In the SCF object hierarchy, SUBSYS is the highest of the possible objects for this command.
Example
To obtain a detailed report of the configuration of the OSS subsystem and send informational
messages to the file CMDLOG, enter the following command:
INFO /OUT CMDLOG/ SUBSYS $ZPMON, DETAIL
A display such as the following is written to CMDLOG:
OSS Detailed Info SUBSYS \NODE1.$ZPMON
*IOTimeout............. 60
*FsckCPU............... 1
*Report ............... $SYSTEM.MONDATA.FSCKOUT
*ZOSSVol............... $SYSTEM.ZOSS
CreateBy.............. $ZPMON
CreateTime............ 12 Dec 2001 12:48:28.554
AlterBy............... SUPER.SUPER
AlterTime............. 03 Mar 2002 01:19:11.335
*AutoStart............. MANUAL
NAMES Command
The NAMES command lists objects managed through the OSS Monitor. The syntax of the NAMES
command is:
NAMES [ /OUT filename/ ] [ object-type ] [ object-name ]
[, SEL [ NOT ] state ]
OSS Monitor SCF Command Reference Information 309