Open System Services Management and Operations Guide (G06.30+, H06.08+, J06.03+)

any paramvalue, an error message is displayed listing the possible values for the missing
paramvalue.
If resource information is not available for any resource (due to an error returned by the resource
agent server), then blank values are displayed for current and peak usage information for that
resource.
SEL [ NOT ] state
directs the command to apply only to servers that are in the specified state or, when the NOT
field is used, only to servers that are not in the specified state. Valid values for state are:
DescriptionValue
The server is started.STARTED
The server is ready to be started.STOPPED
The information returned for a summary report has the following format:
OSS Status SERVER server-devicename
ServerName State LastError ErrorDetail
servername state error error-detail
server-devicename
is the server name of the server whose status is displayed, shown as a device of the OSS
Monitor process.
servername
is the server name of the server whose status is displayed.
state1
describes the state of the server.
DescriptionValue
The server process is running.STARTED
The server process is not running.STOPPED
error1
is the error number of the last OSS Monitor error that occurred during an operation on the
server. See “Numbered Messages” (page 361) for an explanation of a specific error number.
error-detail
is the error number of the Guardian file-system error (if any) reported with the error value.
For information about Guardian file-system errors, see the Guardian Procedure Errors and
Messages Manual.
The information returned for a detailed report (DETAIL option) has this format if the SERVER object
is an OSS name server:
OSS Detailed Status SERVER server-devicename
State.................. state1
StartTime.............. time1
LastError.............. error1
ErrorDetail............ error-detail
ErrorTime.............. time2
LastControlSyncTime.... time3
AlterAfterSyncOrStart.. status1
*CPU.................... processor1
*BackupCPU.............. processor2
*SQLTimeout............. time4
*InodeCache............. size1
OSS Monitor SCF Command Reference Information 325