Open System Services Management and Operations Guide (G06.30+, H06.08+, J06.03+)

SEEPPARAMTEXT startup-param-text
indicates the startup parameter text in the startup message sent to the OSS SEEP.
Considerations
• The DETAIL display for an unstarted OSS name server differs from that of a started OSS name
server. If an OSS name server is not in the STARTED state, its inode cache information, link
cache configuration, and OSS name server attributes are not displayed.
• Beginning with the J06.14 and H06.25 RVUs, the param field is valid only for OSS resource
agent servers. If a param value is specified, the DETAIL option must also be set. (param values
are only valid when DETAIL is specified.) The current and peak usage information for AF_UNIX
socket file-descriptors passing operations is blank, unless the resource has been utilized
previously. If the current and peak usage information for any resource cannot be obtained,
then the current and peak usage information is displayed as blank for the resource.
• If the attribute value settings have been altered by an SCF CONTROL SYNC command, the
STATUS SERVER command displays the new values of the attributes. However, the currently
running OSS SEEP might be using the older values because newly configured attribute
values—other than SEEPENABLED and SEEPRESPONSETIMEOUT—come into effect only when
the OSS SEEP is restarted.
Examples
• To obtain detailed information about the status of the OSS name server for the root fileset
(#ZPNS), enter the following command:
STATUS SERVER #ZPNS, DETAIL
A display similar to the following is returned:
OSS Detailed Status SERVER \NODE1.$ZPMON.#ZPNS
State....................... STARTED
StartTime................... 25 Nov 2002, 10:23:20.123
LastError................... 0
ErrorDetail................. 0
ErrorTime................... 25 Nov 2002, 10:23:20.123
LastControlSyncTime........ 25 Nov 2002, 12:23:43.234
AlterAfterSyncOrStart...... TRUE
*CPU........................ 1
*BackupCPU.................. 0
*SQLTimeout................. 60
*InodeCache................. 4096
InodeCacheInuse............ 100 (2% of InodeCache)
MaxInodeCacheUsed.......... 2993 (73% of InodeCache)
TimeMaxInodeCacheUsed...... 19 Nov 2002,23:23:34.343
TimeMaxInodeCacheReset..... 19 Nov 2002,12:22:34.343
*LinkCache.................. 4096
LinkCacheInuse............. 200 (5% of LinkCache)
MaxLinkCacheUsed........... 1933 (47% of LinkCache)
TimeMaxLinkCacheUsed....... 19 Nov 2002,23:23:34.344
TimeMaxLinkCacheReset...... 19 Nov 2002,12:24:12.123
• To obtain information about the OSS sockets local server $ZPLS and send informational
messages to the file CMDLOG, enter the following command:
STATUS /OUT CMDLOG/ SERVER #ZPLS
NOTE: This example is valid for systems running AF_UNIX Release 1 software only.
• To obtain information about the OSS sockets local server 2 $ZLS01 and send informational
messages to the file CMDLOG, enter the following command:
STATUS /OUT CMDLOG/ SERVER #ZLS01
OSS Monitor SCF Command Reference Information 329