Open System Services Management and Operations Guide (G06.30+, H06.08+, J06.03+)

Cause
A Subsystem Control Facility (SCF) CONTROL FILESET command was entered, but the fileset
targeted by it is corrupted.
Effect
The command is not processed.
Recovery
Use the SCF STOP FILESET command to stop the fileset. Recover the fileset using the SCF
DIAGNOSE FILESET command with the REPAIR option. Restart the fileset with the START FILESET
command, then reissue the CONTROL FILESET command if necessary.
55
OSS E00055 The MAXINODES value is lower than the number of currently
inuse inodes inuseinodes for the fileset fileset.
inuseinodes
is the current number of inodes in use.
fileset
identifies the affected fileset.
Cause
A Subsystem Control Facility (SCF) CONTROL FILESET command was entered, but the specified
MAXINODES value is lower than the current number of inodes in use.
Effect
The command is not processed.
Recovery
Use the ALTER FILESET command to change the MAXINODES value to a value greater than the
current number of inodes in use and reissue the CONTROL FILESET command with the SYNC
option.
56
OSS E00056 The primary Name Server server failed to migrate to the
processor specified by the CPU attribute.
server
identifies the affected server process.
Cause
A Subsystem Control Facility (SCF) CONTROL SERVER command was entered, but the processor
specified by its CPU attribute is down.
Effect
The command is not processed.
Recovery
Use the ALTER SERVER command to change the CPU attribute, and reissue the CONTROL SERVER
command with the SYNC option.
57
OSS E00057 The backup Name Server server failed to migrate to the
processor specified by the BACKUPCPU attribute.
server
identifies the affected server process.
Cause
A Subsystem Control Facility (SCF) CONTROL SERVER command was entered, but the processor
specified by its BACKUPCPU attribute is down.
376 Messages