Open System Services Management and Operations Guide (G06.30+, H06.08+, J06.03+)

Cause
The specified MAXINODES value is less than 110 percent of the number of in-use inodes. This
message can occur when an OSS name server tries to mount an existing fileset and the previous
maximum value did not allow reasonable growth.
Effect
This is an informational message only.
Recovery
No immediate action is required. The disk capacity of the fileset should be checked to determine
if its MAXINODES value should be increased further.
61
OSS W00061 The fileset is started, but not all the volumes in the pool
edit file are eligible for file creation
Cause
A Subsystem Control Facility (SCF) START FILESET command was entered, but one or more of
the disk volumes configured for the storage creation pool for the fileset cannot be used to store
newly created OSS files. The storage pool for the fileset has reached the limit of 256 disk volumes
and the storage creation pool file now contains one or more new disk volume names.
Effect
This is an informational message only.
Recovery
No immediate action is required. However, the disk capacity of the fileset should be checked
in case new OSS files will need to be created.
Use the SCF STATUS FILESET command with the DETAIL option to check the disk volumes in the
storage creation pool. If the storage creation pool contains no disk volumes eligible for new file
creation, possible actions include:
• Delete unused files from the fileset to free space on disk volumes already in the storage pool
(when all OSS files have been removed from a disk volume, it is no longer part of the storage
pool unless it is also in the storage creation pool). Then use an SCF CONTROL FILESET
command with the SYNC option to update the storage creation pool from the pool edit file.
• Move files from this fileset to another fileset with more growth capacity to free space on
disk volumes already in the storage pool (when all OSS files have been removed from a
disk volume, it is no longer part of the storage pool unless it is also in the storage creation
pool). Then use an SCF CONTROL FILESET command with the SYNC option to update the
storage creation pool from the pool edit file.
64
OSS E00064 The RESTRICTEDACCESS attribute of the fileset could not be
updated because a disk process could not perform the operation
Cause
A Subsystem Control Facility (SCF) CONTROL FILESET command was entered but the
RESTRICTEDACCESS attribute of the fileset has changed and one or more disk processes
associated with the fileset cannot perform the operation.
Effect
The RESTRICTEDACCESS fileset attribute is not changed. Other fileset attributes might be
synchronized.
Recovery
Make all of the disks in that fileset available, then attempt to alter the RESTRICTEDACCESS fileset
attribute again.
378 Messages