Open System Services Management and Operations Guide (G06.30+, H06.08+, J06.03+)

Utility PARAMs
Beginning with the T0585AAB version, the EasySetup utilities support the following TACL PARAM
declarations:
Used byPARAM valuePARAM Name
A valid disk volume name that identifies the disk on which
the Event Management Service (EMS) subvolume
EASYSETUP^EMSVOL OSSSETUP
STARTOSS
(ZSPIDEF) resides. This subvolume must contain the event
definition files ZOSSTACL and ZEMSTACL.
STOPOSS
OSSREMOV
Specifying this volume name enables EMS message
logging by the utilities and specifies the location of the
required SPI definition files.
If you do not specify a volume name using this parameter,
the EMS subvolume is assumed to be on $SYSTEM. If the
SPI definition files are installed on $SYSTEM, the OSS
utilities generate EMS messages. If the SPI definition files
are not installed on $SYSTEM and the
EASYSETUP^EMSVOL parameter does not specify another
location, the OSS utilities do not generate EMs messages.
The keyword $NULL, if the utility is to include the $NULL
process among its actions.
EASYSETUP^STARTUP OSSSETUP
STARTOSS
The keyword $ZSMP, if the utility is to include the $ZSMP
process among its actions.
STOPOSS
OSSREMOV
Both of the above keywords, separated by a blank and
enclosed in quotation marks.
The default action excludes either process for which a
keyword is omitted.
$ZSMP, the security manager process, is not required to
be running before the OSS Monitor is started. However,
Safeguard uses $ZSMP, and if $ZSMP is not running,
security auditing, user aliases, and supplementary groups
are not available for the OSS environment.
It is not required to start $NULL before starting the OSS
Monitor; however, many applications use $NULL.
HP recommends that you:
• Add and start $NULL as a generic process either by
using this param or by adding the process manually.
• Install the Safeguard product and add and start the
$ZSMP process as a generic process either by using
this param or adding the process manually. Do not
use this parameter to add the $ZSMP process if you
system does not have Safeguard installed.
OSSSETUPA valid disk volume name that identifies the disk on which
the OSS installation subvolume (ZOSSUTL) resides.
EASYSETUP^UTILVOL
The specified volume must be on the local NonStop server
node (the COPYOSS macro called by OSSSETUP does
not allow installation on remote nodes).
The default value is $SYSTEM.
OSSSETUPA valid disk subvolume name that identifies the disk on
which the TCP/IP (network services) configuration files
are installed.
EASYSETUP^TCPIP^SUBVOL
NOTE: This TACL PARAM
is available beginning
The TCP/IP files are placed in the Guardian environment,
usually in the $SYSTEM.ZTCPIP subvolume; however, the
TCP/IP files can reside in a different subvolume.
with the T0585H01^AAF
version (J06.16 and
H06.27 RVUs).
If you do not specify a subvolume name using this
parameter, the default value is $SYSTEM.ZTCPIP.
EasySetup Utilities 401